Tuftex MultiWall
Polycarbonate panels | Twinwall profile | 20x times stronger than fiberglass |
• High light transmission
• UV protected - superior thermal insulation
• Virtually unbreakable, 20X stronger than glass
• Withstands up to 125 ° F
• Fire rating -ASTM E84 Class A
Tuftex MultiWall Building Panels are backed up with a limited ten year warranty from the purchase date so you can be confident of your project success.
Coming Soon...




Always review and comply with local building regulations and safety guidelines
-
Remove 2" of film from all edges to apply tape and connect profiles
-
Pre-drill all fasteners holes 1/16" larger than fastener - use 9/32" bit if using TUFTEX® 2" Fasteners
-
Apply tape to ends of panels and slide on U-Channel profiles - TOP SIDE FACING OUTWARD
-
DO NOT over tighten fasteners
-
Fasten no more than 2" from edge of panel. No more than 24" between fasteners
-
Maximum overhang is 3"
-
System does not need sealant, but 100% silicone sealant may be applied to inside of H or U channel profiles
-
100% silicone sealant may be used to seal flashing along side walls
-
Polycarbonate and silicone contract and expand at different rates and may cause complications when sealing
Care and maintenance
- Apply warm water to the surface of the polycarbonate
- Wipe with any soft cloth, and warm soapy water
- Rinse off and use paper towels or any soft cloth to dry the sheet off
The use of harsh tools or certain chemicals could cause abrasions to the surface of polycarbonate sheets.
Need help?
Contact us for step-by-step instructions to ensure easy, safe, and efficient installation of your Tuftex MultiWall panels and ask for other thickness and colors available
- minimum order qualities required; lead
times may vary
