Ondura Premium Series 10
10 corrugation asphalt infused roofing panel | Wave profile that will not rust or corrode | Interlocking guides
Why choose Ondura Premium Series 10?
Quality roofing system
Color matching accessories (fasteners and ridge caps)
Featuring embossments for easy install
Limited lifetime warranty
No special tools required
Unlimited customer support
Product Benefits:
- Will not rust or corrode
- Lightweight for easy transportation and handling
- No sharp edges
- Application on full deck only (OSB type)
- Wind resistant to 180 MPH
Ondura Premium Series is backed up with a limited lifetime warranty so you can be confident Onduline is always here to make sure your project is a success.
Length | 79 inches |
Width | 38 inches |
Thickness | 1/8 inch |
Corrugation Height | 1.5 inches |
Corrugation Pitch | 3.8 inches |
Product Surface | 20.8 ft2 |
Weight of panel | 14.4 lbs. |
Weight of gross surface | 0.69 lbs./ft2 |
Corrugations | 10 |
Overlap | 4 inches |
Net coverage area | 17.7 ft2 ≈ 5.65 panels/100 ft2 |
Available colors |
|
Project Inspiration













Installation Requirements
Ondura Premium Series 10 can be installed:
- Over most existing roofing, on plywood/OSB, or on purlins depending on slope and snow load.
- Minimum slope possible : 2:12 with additional waterproofing
- Installation guide provides instructions for 3:12 slope or greater
Consult the Installation Guide below for simple step-by-step instructions to ensure easy, safe, and efficient installation of your Ondura Premium Series roof and always review and comply with local building regulations and safety guidelines.
