Tuftex SeaCoaster

Colors
Why Choose Tuftex SeaCoaster
Non-Flammable
Will not rust, rot, chip, or peel even in most caustic environments
High gloss finish helps to reflect light
Heat resistant for surface temperatures up to 150F° (opaque)

Width 26 inches
Corrugation Height 9/16 inches
Minimum slope required 1:12 - increase in heavy snow areas
Side and end laps

Side laps: 1 corrugation

End laps: 4 inches

Fasteners per panel

Pre-drill all fastener holes in panels

8' - 25; 10' - 30, 12' - 35, 16' - 45

 

Installation Guide
 
To install Tuftex SeaCoaster panels, follow these guidelines:
  • Pre-drill holes prior to installation
  • Minimum Slope 1:12 [best performance at 2:12 or steeper]
  • Store panels in cool, dry, and shaded place prior to installation
  • Do not walk directly on panels
  • Use 100% silicone or butyl tape as sealant
  • Cut with table saw with plywood blade for best results
  • Hand circular saw (plywood blade) and jigsaws can also be used
  • For small, localized work hand tools can also be utilized
Care & Maintenance:
  • Do not use abrasive or high alkaline cleaners
  • Do not allow pressure washing spray to come into close proximity of panels
  • Do not apply cleaners in direct sunlight or leave cleaners on for extended period of time
  • Keep roof clear of debris
For more information follow the link to our installation guide below.

Videos

Tuftex SeaCoaster under a minute!