PolyCarb

PolyCarb: 26" polycarbonate panel

Ideal for bringing in natural light via skylights or sidelights on your industrial, commercial, or agricultural buildings.

Made with a polycarbonate thermoplastic polymer in an octagonal-wave profile, TUFTEX PolyCarb corrugated panels are 20 times stronger than 5 oz. fiberglass corrugated panels and are designed to withstand a wide range of surface temperatures: 270° F to -40° F. All TUFTEX PolyCarb panels are well suited to outdoor applications where light transmission is desired.

Colors

Description
Installation Guidelines
ACCESSORIES
Related Products

Description

MAIN BENEFITS

Retains Color and Opacity as opposed to FRP

Up to 20x stronger than Fiberglass

Blocks nearly 100% of harmful UV radiation

Withstands Extreme Temperatures (as much as -40F° to +270F°)

Hail & Wind Resistant

Will NOT rust or corrode

Easy to install with standard tools

Lifetime Limited Warranty

RIDGELITE Polycarbonate Ridge also available

You can find out more about RIDGELITE by clicking here.

Standard Lengths	8' 10' 12' 16' 20' 20'4" 24'
Custom Lengths	2'6" to 24'6" in 1-inch increments Contact our Sales & Customer Service for more information
Light Transmission	Clear 90% \| Smoke 80% \| White 70%
Panel Width	26" (effective coverage 24")
Thickness	0.032" (0.8mm)
Weight	0.69 lbs./ft.
Fasteners	Every 6 inches horizontally
Span	2' on center

PROFILES AVAILABLE:

POLYLITE 9-INCH ON CENTER

POLYLITE 12-INCH ON CENTER

POLYCARB 26" Greca

Stocking Lengths	9-Inch On Center	12-Inch On Center	26" Wide Greca
Clear
8'	860A	865A	1418A
10'	860B	865B	1418B
12'	860C	865C	1418C
16'	860E	865E	1418E
20'	860F	865F
20'4"
24'	860H
White
8'	863A	866A	1413A
10'	863B	866B	1413B
12'	863C	866C	1413C
16'	863E	866E	1413E
20'	863F	866F
20'4"
24'
Smoke
8'	862A		1419A
10'	862B		1419B
12'	862C		1419C
16'	862E		1419E
20'	862F
20'4"
24'

Please click below for the PolyLite warranty.

POLYLITE Warranty

Coming soon....

Installation Guidelines

TUFTEX POLYCARB INSTALLATION

Pre-drill holes prior to installation
Minimum Slope 1:12 [best performance at 2:12 or steeper]
Store panels in cool, dry, and shaded place prior to installation
Do not walk directly on panels
Use 100% silicone or butyl tape as sealant
Cut with table saw with plywood blade for best results
Hand circular saw (plywood blade) and jigsaws can also be used
For small, localized work hand tools can also be utilized

Care & Maintenance:

Do not use abrasive or high alkaline cleaners
Do not allow pressure washing spray to come into close proximity of panels
Do not apply cleaners in direct sunlight or leave cleaners on for extended period of time
Keep roof clear of debris